Geelong • Surf Coast • Bellarine • Golden PlainsMon to Fri, 8:00 am to 5:00 pm0483 959 285
Call JFM0483 959 285
HERITAGE CARPENTRY GEELONG

Heritage Carpentry Geelong: period homes repaired to match

Period and heritage buildings need work that matches the original, not a modern patch. These skills came down from Bob Moodie, three generations back, so we repair and rebuild verandahs, fretwork, finials, sash windows, doors, weatherboards and trims to match what is already there, and keep the original wherever it can be saved.

4.6★Google, 25 reviews
3 generationsOf carpentry in the family
$20MPublic liability insured
MatchedTo the original profiles
Period weatherboard home with restored gable trims and finials
WHAT WE RESTORE

Heritage carpentry, outside and in

Most heritage work is a mix of these. The common thread is repairing what can be saved and matching what can’t.

Verandahs, brackets and fretwork

Verandah posts, brackets, friezes and fretwork repaired or remade to the original pattern, so a verandah keeps its character when the rotten parts are gone.

Finials, barge boards and gables

Finials, barge boards and gable trims taken down, repaired or copied, and refixed with the roof flashings checked while they are off.

Sash windows

Every part of a sash window: cords, weights, beads, rails, sills, glass and putty, and new sashes made to the old profile.

Doors and joinery

Ledged and braced doors, panel doors and joinery made to match, hung on the original frames where they are sound.

Weatherboards and profiles

Old weatherboard and lining profiles matched from stock or milled, cut in so the repair disappears.

Interiors

Skirtings, architraves, picture rails, VJ boards and timber floors repaired and matched, room by room.

New ledged timber doors made to match and painted on a heritage brick building
Verandah posts and timber brackets on a period home
Period interior with timber doors, architraves and floors restored
HOW WE WORK ON OLD BUILDINGS

Keeping the original, and matching the rest

Repair before replace

Sound timber stays. Rot is cut back and spliced, so more of the original survives.

Match the profile

Mouldings, boards and beads matched to what is there, run or sourced to the same shape and size.

Old joints, old methods

Ledged and braced doors, mortised frames and putty-glazed sashes are rebuilt the way they were made.

Finish to suit

Painted, stained or oiled to match the building, so the new work doesn’t stand out.

New timber door made to match, hung beside the original weathered door
Gable trims and barge boards on a period weatherboard home
HOW IT WORKS

How a heritage job runs

Show us the building

Photos of the part that needs work, and the house around it.

We look closely

What is original, what is sound, and what has to be matched.

A written quote

Repair, matching and finish set out, with anything uncertain flagged.

Repaired and finished

Matched to the original and finished to suit the building.

FROM OUR JOB BOOK

Heritage work we have done

A heritage building at Lovely Banks

A custom timber door made to match the existing doors of a heritage brick building, hung and painted with the whole frame, and a side section of the frame replaced when it gave way. 2022.

Finials and boards in Newtown

Two finials taken down and the roof flashing checked under them, rotten weatherboard sections replaced with every end primed, and the side gate repaired with a new post. 2019.

A sash window in Drumcondra

A rotted window removed and sent to a joinery for a new sash, the opening covered meanwhile, then the sash fitted and the weatherboards around it replaced. 2025.

A bay window in Batesford

The rotten timber panelling under a front bay window replaced, primed and painted to match. 2020.

Lighthouse stairs in Queenscliff

Steel stairs at a lighthouse prepared, treated for rust and painted, with the safety paperwork done first. 2021.

VJ boards in Belmont

Water-damaged VJ boards on the external walls replaced, with the skirtings and architraves redone. 2025.

HERITAGE QUESTIONS

Heritage carpentry: common questions

Can you match original timber profiles?
Yes. We run or source the profile to match what is there, and repair rather than replace wherever the timber is still sound.
Do you work on properties under a heritage overlay?
Yes. Where an overlay applies we work to what the permit allows and keep the original fabric wherever it can be saved.
Do you restore sash windows?
Yes, every part of them: cords and weights, beads, rotten rails and sills, glass and putty, and new sashes made to match. The detail is on our window repairs page.
Can you make a door or joinery to match the original?
Yes. We make doors, trims and mouldings to match what is there, hang them on the existing frame where it is sound, and paint or stain them to suit the building.
Why does heritage work take longer?
Because we take the old timber off carefully, find out what is sound, and repair before we replace. Matching a profile or a joint by hand takes longer than fitting something new, and it is the difference you see.
RELATED JOBS

Other work on older homes

Heritage work usually touches one of these.

WHERE WE DO THIS

Heritage carpentry across the region

We work on period homes across Geelong, the Surf Coast, the Bellarine and Golden Plains. Pick your town to see everything else we do there.

Heritage carpentry by suburb

GET IN TOUCH

What part of your old house would you most like brought back?

Send us photos of it and we will come and look closely and give you a free estimate.

Members ofHIA MemberMaster Builders Victoria Member